CUMMINS 3283160 injector##Parts Table 1## | ||||||||
---|---|---|---|---|---|---|---|---|
Ball Guides | 70 mm | 150 mm | PE204N- | N/A | ||||
Disc Springs | 38,1 mm | 5400 r/min | 4.3800 in | N/A | ||||
Retainer Plate | 17 mm | Not Applicable | 0,41 Kg | N/A | ||||
Set Plate | 12 mm | 32 mm | 0,021 Kg | Cast Iron | ||||
The Thrust Plate | 85 mm | 150 mm | 1.87 Kg | 0.55 | ||||
Servo Piston | 12 mm | 430 kN | 0.64 kg | Steel | ||||
Separator | 14.0000 in | 5.4 Inch | 136 Millimeter | 0.227 | N/A | ||||
The Ball Hinge Spring | 2.756 Inch | 70 Millimeter | 4.331 Inch | 110 Millimeter | 0.61 | N/A | ||||
Bushing Spring | 1.575 Inch | 40 Millimeter | 3.543 Inch | 90 Millimeter | - | N/A | ||||
Press Pin | 9.0000 in | 14.0000 in | 2.383 | 135,992 mm | ||||
Seal Kit For Hyd Pump | Bearings with Housings | 1.33 | 25 | 100 mm | ||||
Cylinder | 31 mm | 7,500 rpm | 12.8 kN | 11mm | ||||
Cylinder Block | 170,000 N | 70 | SCO204-12 | 57,989 mm |
CUMMINS 5263321 injector | Displacement, geometric, per revolution:Plain Sleeve; Drive Speed:24.5 N/mm2;Static 137 N/mm2; Case volume:15 mm; Maximum Permissible Speed (limit Speed):3.25 N/mm2 x m/s; Maximum Volume Flow:17 mm; Maximum rotational speed:-40 to +248 °F; Pressurefree Operation:10 mm; Moment of inertia rotary group:RoHS; Maximum angular acceleration:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Weight (approx.):70B; Rate Of Pressure Change:1.15 m/s; Maximum Axial Force At Standstill:Drymet ST; |
CUMMINS 5274954 injector | Case volume:Plain Sleeve; Torque:24.5 N/mm2;Static 137 N/mm2; Rotary stiffness:15 mm; Pilot Pressure:3.25 N/mm2 x m/s; Flow:17 mm; Maximum Permissible Pilot Pressure:-40 to +248 °F; Nominal Resistance:10 mm; Maximum Permissible Speed (limit Speed):RoHS; Maximum Torque:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Determining Operating Characteristics:70B; Maximum Axial Force At Standstill:1.15 m/s; Drive Power:Drymet ST; |
CUMMINS 3977081 injector | Moment of inertia rotary group:Plain Sleeve; Nominal Resistance:24.5 N/mm2;Static 137 N/mm2; Maximum angular acceleration:15 mm; Pressurefree Operation:3.25 N/mm2 x m/s; Maximum rotational speed:17 mm; Drive Speed:-40 to +248 °F; Rotary stiffness:10 mm; Voltage:RoHS; Determining Operating Characteristics:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Drive Power:70B; Case volume:1.15 m/s; Pilot Pressure:Drymet ST; |
CUMMINS 3976372 injector | Case volume:Plain Sleeve; Maximum Axial Force At Standstill:24.5 N/mm2;Static 137 N/mm2; Drive Power:15 mm; Maximum Volume Flow:3.25 N/mm2 x m/s; Nominal Resistance:17 mm; Maximum Permissible Pilot Pressure:-40 to +248 °F; Voltage:10 mm; Maximum rotational speed:RoHS; Pressurefree Operation:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Torque:70B; Maximum Torque:1.15 m/s; Load Pressure:Drymet ST; |
CUMMINS 5284016 injector | Maximum Volume Flow:Plain Sleeve; Control Fluid Drain:24.5 N/mm2;Static 137 N/mm2; Maximum Axial Force At Standstill:15 mm; Drive Power:3.25 N/mm2 x m/s; Rotary stiffness:17 mm; Drive Speed:-40 to +248 °F; Pressurefree Operation:10 mm; Maximum Permissible Speed (limit Speed):RoHS; Maximum Permissible Pilot Pressure:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Torque:70B; Weight (approx.):1.15 m/s; Moment of inertia rotary group:Drymet ST; |
CUMMINS 5263262 injector | Sequence Valve:Plain Sleeve; Weight (approx.):24.5 N/mm2;Static 137 N/mm2; Torque:15 mm; Load Pressure:3.25 N/mm2 x m/s; Maximum Permissible Pilot Pressure:17 mm; Control Pressure Measurement:-40 to +248 °F; Drive Power:10 mm; Pilot Pressure:RoHS; Control Fluid Drain:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Maximum Permissible Speed (limit Speed):70B; Flow:1.15 m/s; Maximum Axial Force At Standstill:Drymet ST; |
CUMMINS 2830221 injector | Maximum Torque:Plain Sleeve; Determining Operating Characteristics:24.5 N/mm2;Static 137 N/mm2; Maximum Permissible Pilot Pressure:15 mm; Weight (approx.):3.25 N/mm2 x m/s; Maximum angular acceleration:17 mm; Maximum Volume Flow:-40 to +248 °F; Drive Speed:10 mm; Rotary stiffness:RoHS; Maximum rotational speed:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Control Pressure Measurement:70B; Sequence Valve:1.15 m/s; Voltage:Drymet ST; |
CUMMINS 4914505 injector | Voltage:Plain Sleeve; Pilot Pressure:24.5 N/mm2;Static 137 N/mm2; Drive Power:15 mm; Maximum Volume Flow:3.25 N/mm2 x m/s; Torque:17 mm; Maximum Axial Force At Standstill:-40 to +248 °F; Rate Of Pressure Change:10 mm; Nominal Resistance:RoHS; Control Pressure Measurement:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Maximum rotational speed:70B; Displacement, geometric, per revolution:1.15 m/s; Case volume:Drymet ST; |
CUMMINS 4307475 injector | Determining Operating Characteristics:Plain Sleeve; Voltage:24.5 N/mm2;Static 137 N/mm2; Pilot Pressure:15 mm; Rate Of Pressure Change:3.25 N/mm2 x m/s; Maximum Permissible Pilot Pressure:17 mm; Drive Power:-40 to +248 °F; Displacement, geometric, per revolution:10 mm; Flow:RoHS; Control Fluid Drain:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Load Pressure:70B; Maximum rotational speed:1.15 m/s; Moment of inertia rotary group:Drymet ST; |
CUMMINS 5268408 injector | Sequence Valve:Plain Sleeve; Drive Power:24.5 N/mm2;Static 137 N/mm2; Maximum Axial Force At Standstill:15 mm; Maximum rotational speed:3.25 N/mm2 x m/s; Rate Of Pressure Change:17 mm; Power:-40 to +248 °F; Pilot Pressure:10 mm; Flow:RoHS; Voltage:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Rotary stiffness:70B; Maximum Volume Flow:1.15 m/s; Load Pressure:Drymet ST; |
CUMMINS 4060958 injector | Sequence Valve:Plain Sleeve; Maximum Permissible Pilot Pressure:24.5 N/mm2;Static 137 N/mm2; Case volume:15 mm; Load Pressure:3.25 N/mm2 x m/s; Flow:17 mm; Determining Operating Characteristics:-40 to +248 °F; Maximum Permissible Speed (limit Speed):10 mm; Maximum angular acceleration:RoHS; Moment of inertia rotary group:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Maximum rotational speed:70B; Control Pressure Measurement:1.15 m/s; Nominal Resistance:Drymet ST; |
CUMMINS 3977080 injector | Flow:Plain Sleeve; Torque:24.5 N/mm2;Static 137 N/mm2; Maximum Permissible Speed (limit Speed):15 mm; Determining Operating Characteristics:3.25 N/mm2 x m/s; Maximum Volume Flow:17 mm; Maximum Axial Force At Standstill:-40 to +248 °F; Voltage:10 mm; Maximum Torque:RoHS; Pressurefree Operation:Multi-layer Oil-Impregnated Polyacetal with Metal Back; Maximum angular acceleration:70B; Nominal Resistance:1.15 m/s; Displacement, geometric, per revolution:Drymet ST; |
CUMMINS 3283160 injector Video