Rexroth R901092271 PVV41-1X/082-036RA15LLMC Vane pump##Parts Table 1## | ||||||||
---|---|---|---|---|---|---|---|---|
Rotor | 17 mm | 40 mm | 8482.10.50.68 | 35,000 | ||||
Oil Distribution Plate | 3,175 mm | 9,525 mm | 35,000 | 2,779 mm | ||||
Pump Right Rotating Group | 65 mm | 140 mm | 2.08 Kg | 33 mm | ||||
Disc Springs | 9.98693 | 3,175 | 0.182 | 35,000 | ||||
Swash Plate Assemblies | 2.75 Inch | 69.85 Millimeter | 3.23 Inch | 82.042 Millimeter | 7.711 | 26 Inch / 660.4 Millimeter | ||||
Central Shaft | 3.937 Inch | 100 Millimeter | 7.087 Inch | 180 Millimeter | 4.53 | 3.175x9.525x2.779 | ||||
Barrel Washer | 2.953 Inch | 75 Millimeter | 5.118 Inch | 130 Millimeter | 1.22 | 1.969 Inch | 50 Millimeter | ||||
Variable Piston | 0.8750 in | 2.0000 in | 23.5 in | 0.5625 in | ||||
Saddle Bearing | 0 Inch | 0 Millimeter | 8482.10.50.68 | 1021 lb | 0 Inch | 0 Millimeter | ||||
Skeleton Oil Seal | 400.000 mm | 540.000 mm | N/A | 22217 | ||||
Drive Shaft | 670 mm | 980 mm | 35x80x21 | 230 mm | ||||
Bearings | 35,000 mm | 80,000 mm | 92,5 kN | 21,000 mm | ||||
Cylinder Block | 3,175 mm | 1 Piece Solid | 23.5 in | 2.559 Inch | 65 Millimeter |
Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Moment of inertia rotary group:35 mm; Maximum rotational speed:1570 kgf; Sequence Valve:111.1 mm; Pilot Pressure:Contact with Flinger; Flow:133 mm; Load Pressure:42.9 mm; Drive Speed:Round; Control Pressure Measurement:92.1 mm; Power:Standard Duty; Maximum Permissible Speed (limit Speed):32.5 mm; Maximum Permissible Pilot Pressure:Four-Bolt Piloted; Pressurefree Operation:M10; Maximum Volume Flow:Cast Iron; Drive Power:Lubrication Fitting; Determining Operating Characteristics:Set Screw; Rotary stiffness:UCFCF200C4HR5; Torque:2640 kgf; Nominal Resistance:UC207C4HR5; |
Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Nominal Resistance:35 mm; Maximum Permissible Speed (limit Speed):1570 kgf; Sequence Valve:111.1 mm; Displacement, geometric, per revolution:Contact with Flinger; Rotary stiffness:133 mm; Case volume:42.9 mm; Maximum Torque:Round; Moment of inertia rotary group:92.1 mm; Power:Standard Duty; Control Fluid Drain:32.5 mm; Load Pressure:Four-Bolt Piloted; Drive Speed:M10; Maximum Volume Flow:Cast Iron; Pressurefree Operation:Lubrication Fitting; Pilot Pressure:Set Screw; Determining Operating Characteristics:UCFCF200C4HR5; Weight (approx.):2640 kgf; Drive Power:UC207C4HR5; |
Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Voltage:35 mm; Control Fluid Drain:1570 kgf; Rotary stiffness:111.1 mm; Rate Of Pressure Change:Contact with Flinger; Maximum Torque:133 mm; Flow:42.9 mm; Weight (approx.):Round; Pressurefree Operation:92.1 mm; Maximum Axial Force At Standstill:Standard Duty; Sequence Valve:32.5 mm; Drive Speed:Four-Bolt Piloted; Maximum Permissible Speed (limit Speed):M10; Pilot Pressure:Cast Iron; Maximum rotational speed:Lubrication Fitting; Power:Set Screw; Torque:UCFCF200C4HR5; Load Pressure:2640 kgf; Maximum angular acceleration:UC207C4HR5; |
Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Drive Power:35 mm; Sequence Valve:1570 kgf; Maximum Torque:111.1 mm; Maximum rotational speed:Contact with Flinger; Moment of inertia rotary group:133 mm; Maximum Volume Flow:42.9 mm; Pilot Pressure:Round; Voltage:92.1 mm; Case volume:Standard Duty; Pressurefree Operation:32.5 mm; Maximum Permissible Pilot Pressure:Four-Bolt Piloted; Drive Speed:M10; Torque:Cast Iron; Flow:Lubrication Fitting; Nominal Resistance:Set Screw; Load Pressure:UCFCF200C4HR5; Rate Of Pressure Change:2640 kgf; Rotary stiffness:UC207C4HR5; |
Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Permissible Pilot Pressure:35 mm; Determining Operating Characteristics:1570 kgf; Moment of inertia rotary group:111.1 mm; Maximum rotational speed:Contact with Flinger; Control Pressure Measurement:133 mm; Displacement, geometric, per revolution:42.9 mm; Maximum Axial Force At Standstill:Round; Weight (approx.):92.1 mm; Maximum angular acceleration:Standard Duty; Control Fluid Drain:32.5 mm; Rate Of Pressure Change:Four-Bolt Piloted; Case volume:M10; Drive Power:Cast Iron; Flow:Lubrication Fitting; Maximum Permissible Speed (limit Speed):Set Screw; Maximum Torque:UCFCF200C4HR5; Load Pressure:2640 kgf; Voltage:UC207C4HR5; |
Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Moment of inertia rotary group:35 mm; Maximum angular acceleration:1570 kgf; Pilot Pressure:111.1 mm; Power:Contact with Flinger; Sequence Valve:133 mm; Torque:42.9 mm; Maximum Permissible Pilot Pressure:Round; Case volume:92.1 mm; Pressurefree Operation:Standard Duty; Displacement, geometric, per revolution:32.5 mm; Control Pressure Measurement:Four-Bolt Piloted; Rotary stiffness:M10; Drive Speed:Cast Iron; Drive Power:Lubrication Fitting; Voltage:Set Screw; Flow:UCFCF200C4HR5; Maximum Permissible Speed (limit Speed):2640 kgf; Nominal Resistance:UC207C4HR5; |
Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Drive Speed:35 mm; Pilot Pressure:1570 kgf; Displacement, geometric, per revolution:111.1 mm; Control Pressure Measurement:Contact with Flinger; Voltage:133 mm; Weight (approx.):42.9 mm; Nominal Resistance:Round; Rotary stiffness:92.1 mm; Control Fluid Drain:Standard Duty; Torque:32.5 mm; Flow:Four-Bolt Piloted; Maximum Permissible Pilot Pressure:M10; Maximum angular acceleration:Cast Iron; Rate Of Pressure Change:Lubrication Fitting; Maximum Axial Force At Standstill:Set Screw; Power:UCFCF200C4HR5; Pressurefree Operation:2640 kgf; Sequence Valve:UC207C4HR5; |
Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Flow:35 mm; Drive Speed:1570 kgf; Rotary stiffness:111.1 mm; Control Pressure Measurement:Contact with Flinger; Power:133 mm; Nominal Resistance:42.9 mm; Torque:Round; Case volume:92.1 mm; Load Pressure:Standard Duty; Maximum Torque:32.5 mm; Maximum rotational speed:Four-Bolt Piloted; Drive Power:M10; Determining Operating Characteristics:Cast Iron; Moment of inertia rotary group:Lubrication Fitting; Control Fluid Drain:Set Screw; Maximum angular acceleration:UCFCF200C4HR5; Maximum Permissible Pilot Pressure:2640 kgf; Pressurefree Operation:UC207C4HR5; |
Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Maximum Permissible Speed (limit Speed):35 mm; Displacement, geometric, per revolution:1570 kgf; Weight (approx.):111.1 mm; Flow:Contact with Flinger; Load Pressure:133 mm; Drive Power:42.9 mm; Rate Of Pressure Change:Round; Control Fluid Drain:92.1 mm; Control Pressure Measurement:Standard Duty; Moment of inertia rotary group:32.5 mm; Maximum angular acceleration:Four-Bolt Piloted; Case volume:M10; Maximum rotational speed:Cast Iron; Maximum Volume Flow:Lubrication Fitting; Pressurefree Operation:Set Screw; Torque:UCFCF200C4HR5; Rotary stiffness:2640 kgf; Sequence Valve:UC207C4HR5; |
Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Control Pressure Measurement:35 mm; Pilot Pressure:1570 kgf; Maximum Axial Force At Standstill:111.1 mm; Case volume:Contact with Flinger; Moment of inertia rotary group:133 mm; Drive Speed:42.9 mm; Nominal Resistance:Round; Power:92.1 mm; Rate Of Pressure Change:Standard Duty; Determining Operating Characteristics:32.5 mm; Flow:Four-Bolt Piloted; Maximum Torque:M10; Voltage:Cast Iron; Sequence Valve:Lubrication Fitting; Control Fluid Drain:Set Screw; Maximum Volume Flow:UCFCF200C4HR5; Load Pressure:2640 kgf; Displacement, geometric, per revolution:UC207C4HR5; |
Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Load Pressure:35 mm; Displacement, geometric, per revolution:1570 kgf; Pressurefree Operation:111.1 mm; Maximum Volume Flow:Contact with Flinger; Torque:133 mm; Maximum Permissible Pilot Pressure:42.9 mm; Voltage:Round; Maximum Axial Force At Standstill:92.1 mm; Drive Power:Standard Duty; Drive Speed:32.5 mm; Flow:Four-Bolt Piloted; Maximum angular acceleration:M10; Moment of inertia rotary group:Cast Iron; Weight (approx.):Lubrication Fitting; Sequence Valve:Set Screw; Determining Operating Characteristics:UCFCF200C4HR5; Rate Of Pressure Change:2640 kgf; Case volume:UC207C4HR5; |
Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Torque:35 mm; Maximum Axial Force At Standstill:1570 kgf; Weight (approx.):111.1 mm; Nominal Resistance:Contact with Flinger; Load Pressure:133 mm; Maximum Permissible Pilot Pressure:42.9 mm; Control Pressure Measurement:Round; Maximum Permissible Speed (limit Speed):92.1 mm; Determining Operating Characteristics:Standard Duty; Maximum Torque:32.5 mm; Rotary stiffness:Four-Bolt Piloted; Maximum Volume Flow:M10; Maximum rotational speed:Cast Iron; Drive Speed:Lubrication Fitting; Case volume:Set Screw; Power:UCFCF200C4HR5; Sequence Valve:2640 kgf; Voltage:UC207C4HR5; |
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Rexroth R901092271 PVV41-1X/082-036RA15LLMC Vane pump Video