Rexroth R901120947 PVV41-1X/082-046RA15UUMC Vane pump##Parts Table 1## | ||||||||
---|---|---|---|---|---|---|---|---|
Plunger Sliding Boots | 13.386 Inch | 340 Millimeter | 7.48 Inch | 190 Millimeter | 2.0 | 23.7 | ||||
Spacer | 4.13 Inch | 104.9 Millimeter | 3.688 Inch | 93.675 Millimeter | 0.0 | 15.876 | ||||
Piston Sets | 225 mm | 2,1 mm | 0.0 | 1.5 | ||||
Shoe Piston | 0.433 Inch | 11 Millimeter | 0.197 Inch | 5 Millimeter | 0.0 | - | ||||
Coil Spring | 27.3 | No Pilot | 0.0 | - | ||||
Back Plate | 10100 lbf | 8482.50.00.00 | 0.0 | - | ||||
Shafts | 90 mm | 60 mm | 190MM Bore; Straight Bore Profile; 340MM Outside Diameter; 55MM Width; Brass Cage Matetrial; RBEC 1 | ISO P0; Single Row; Not Separable; No Snap Ring; Relubricatable; C3-Loose Internal Clearance; Reta | MEMBRAY | ||||
Piston Shoe | 47 mm | 25 mm | 1532 | 140 | ||||
Cylinder Blocks | 6.0000 in | 2.7500 in | 140 | 190MM Bore; Straight Bore Profile; 340MM Outside Diameter; 55MM Width; Brass Cage Matetrial; RBEC 1 | ISO P0; Single Row; Not Separable; No Snap Ring; Relubricatable; C3-Loose Internal Clearance; Reta | ||||
Cylinder Block | 225 mm | 130 mm | 0.14 in | 33.338 | ||||
Servo Piston | http://www.qmbearings.com | 654DC | 7.5 mm | No |
Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Rotary stiffness:25 mm; Maximum Torque:Steel; Weight (approx.):Cone & Cup; Power:Steel; Determining Operating Characteristics:62 mm; Voltage:Uncoated; Pressurefree Operation:Open; Flow:DIN ISO 355 / DIN 720; Case volume:18.25 mm; |
Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Rotary stiffness:25 mm; Pressurefree Operation:Steel; Drive Power:Cone & Cup; Determining Operating Characteristics:Steel; Maximum rotational speed:62 mm; Flow:Uncoated; Pilot Pressure:Open; Load Pressure:DIN ISO 355 / DIN 720; Weight (approx.):18.25 mm; |
Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Control Pressure Measurement:25 mm; Load Pressure:Steel; Weight (approx.):Cone & Cup; Displacement, geometric, per revolution:Steel; Nominal Resistance:62 mm; Drive Power:Uncoated; Pilot Pressure:Open; Flow:DIN ISO 355 / DIN 720; Rate Of Pressure Change:18.25 mm; |
Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Sequence Valve:25 mm; Case volume:Steel; Control Fluid Drain:Cone & Cup; Rotary stiffness:Steel; Maximum Torque:62 mm; Power:Uncoated; Pressurefree Operation:Open; Torque:DIN ISO 355 / DIN 720; Nominal Resistance:18.25 mm; |
Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Control Fluid Drain:25 mm; Maximum rotational speed:Steel; Maximum Torque:Cone & Cup; Maximum Permissible Speed (limit Speed):Steel; Nominal Resistance:62 mm; Power:Uncoated; Load Pressure:Open; Voltage:DIN ISO 355 / DIN 720; Maximum Axial Force At Standstill:18.25 mm; |
Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Power:25 mm; Load Pressure:Steel; Rate Of Pressure Change:Cone & Cup; Maximum Permissible Speed (limit Speed):Steel; Rotary stiffness:62 mm; Maximum Axial Force At Standstill:Uncoated; Moment of inertia rotary group:Open; Drive Speed:DIN ISO 355 / DIN 720; Determining Operating Characteristics:18.25 mm; |
Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Nominal Resistance:25 mm; Case volume:Steel; Voltage:Cone & Cup; Drive Power:Steel; Pressurefree Operation:62 mm; Pilot Pressure:Uncoated; Power:Open; Sequence Valve:DIN ISO 355 / DIN 720; Flow:18.25 mm; |
Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum Volume Flow:25 mm; Maximum Axial Force At Standstill:Steel; Sequence Valve:Cone & Cup; Flow:Steel; Weight (approx.):62 mm; Torque:Uncoated; Pressurefree Operation:Open; Control Pressure Measurement:DIN ISO 355 / DIN 720; Drive Speed:18.25 mm; |
Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Maximum Volume Flow:25 mm; Control Fluid Drain:Steel; Maximum Permissible Speed (limit Speed):Cone & Cup; Rate Of Pressure Change:Steel; Displacement, geometric, per revolution:62 mm; Voltage:Uncoated; Maximum Permissible Pilot Pressure:Open; Flow:DIN ISO 355 / DIN 720; Moment of inertia rotary group:18.25 mm; |
Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Maximum Permissible Speed (limit Speed):25 mm; Maximum Axial Force At Standstill:Steel; Maximum Permissible Pilot Pressure:Cone & Cup; Drive Power:Steel; Rotary stiffness:62 mm; Flow:Uncoated; Sequence Valve:Open; Voltage:DIN ISO 355 / DIN 720; Maximum Volume Flow:18.25 mm; |
Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Displacement, geometric, per revolution:25 mm; Torque:Steel; Maximum Axial Force At Standstill:Cone & Cup; Maximum rotational speed:Steel; Determining Operating Characteristics:62 mm; Maximum Permissible Pilot Pressure:Uncoated; Control Fluid Drain:Open; Nominal Resistance:DIN ISO 355 / DIN 720; Maximum angular acceleration:18.25 mm; |
Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Maximum rotational speed:25 mm; Control Fluid Drain:Steel; Nominal Resistance:Cone & Cup; Voltage:Steel; Pilot Pressure:62 mm; Power:Uncoated; Determining Operating Characteristics:Open; Maximum angular acceleration:DIN ISO 355 / DIN 720; Displacement, geometric, per revolution:18.25 mm; |
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Rexroth R901120947 PVV41-1X/082-046RA15UUMC Vane pump Video