Rexroth PVQ41-1X/122-036RA15DDMC Vane pump##Parts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Disc Springs | 80 mm | 140 mm | 33 mm | 2,1 Kg | ||||
| Ball Guide | 25 mm | 62 mm | 17 mm | 65x140x48 | ||||
| Saddle Bearing | C_R_HDS7 | 0.625 Inch | 15.875 Millimeter | 65x140x48 | 15.749 | ||||
| Valve Plate | 0.875 Inch | 22.225 Millimeter | 1.188 Inch | 30.175 Millimeter | 0.625 Inch | 15.875 Millimeter | 0.034 | ||||
| Separator | 1.969 Inch | 50 Millimeter | 3.543 Inch | 90 Millimeter | 1.575 Inch | 40 Millimeter | 0.91 | ||||
| Bearings | Round | Yes | 50MM Bore; 90MM Outside Diameter; 40MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 2 (1 Pair) Bearings; 15 Degree Contact Angle; Phenolic Cage Material; 1 Rib Outer Ring Rac | 0.1 | ||||
| Spindle | 2.9375 in | 8-1/8 in | 4 in | 207 kN | ||||
| Skeleton Oil Seal | 19-1/2 Shaft Dia | Used for Light load | Bearing Unit with Frame | 0.1 | ||||
| Retainer Plate | Contact/Lip | 17 | 5-1/8 in | 1.575 Inch | 40 Millimeter | ||||
| Set Plate | 18-3/8 in | 65x140x48 | 25 | Grommet | ||||
| Regulator | 30 | Non-Expansion Bearing (Fixed) | 1.575 Inch | 40 Millimeter | 19500 | ||||
| Shoe Piston | Nitrile | Yes | 1.969 Inch | 50 Millimeter | Concentric Collar | ||||
| Snap Ring | 65 mm | 140 mm | 48 mm | 207 kN | ||||
| Bearing Plate | Inch | 0.91 | 23192K | 231K | ||||
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Torque:120 mm; Determining Operating Characteristics:106 kN; Control Fluid Drain:180 mm; Maximum Torque:110 kN; Pilot Pressure:28 mm; Maximum Permissible Pilot Pressure:Steel (Balls); Power:25 °; Voltage:9500 RPM; Load Pressure:C0; Rotary stiffness:Phenolic Resin; Case volume:Not for Ball Screws; Maximum angular acceleration:Uncoated; Maximum Volume Flow:Double Sealed; Displacement, geometric, per revolution:28 mm; Maximum rotational speed:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Rate Of Pressure Change:2 mm; Pressurefree Operation:-30 to +100 °C; Flow:70; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Torque:120 mm; Rotary stiffness:106 kN; Determining Operating Characteristics:180 mm; Weight (approx.):110 kN; Control Pressure Measurement:28 mm; Power:Steel (Balls); Case volume:25 °; Maximum Permissible Speed (limit Speed):9500 RPM; Pressurefree Operation:C0; Maximum rotational speed:Phenolic Resin; Maximum Permissible Pilot Pressure:Not for Ball Screws; Flow:Uncoated; Rate Of Pressure Change:Double Sealed; Moment of inertia rotary group:28 mm; Drive Power:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Pilot Pressure:2 mm; Voltage:-30 to +100 °C; Drive Speed:70; |
| Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Maximum Volume Flow:120 mm; Drive Power:106 kN; Determining Operating Characteristics:180 mm; Flow:110 kN; Pressurefree Operation:28 mm; Maximum angular acceleration:Steel (Balls); Maximum Axial Force At Standstill:25 °; Nominal Resistance:9500 RPM; Control Fluid Drain:C0; Maximum Permissible Pilot Pressure:Phenolic Resin; Torque:Not for Ball Screws; Rate Of Pressure Change:Uncoated; Rotary stiffness:Double Sealed; Drive Speed:28 mm; Displacement, geometric, per revolution:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Sequence Valve:2 mm; Maximum rotational speed:-30 to +100 °C; Power:70; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Control Pressure Measurement:120 mm; Torque:106 kN; Flow:180 mm; Case volume:110 kN; Rate Of Pressure Change:28 mm; Drive Power:Steel (Balls); Maximum rotational speed:25 °; Maximum Axial Force At Standstill:9500 RPM; Voltage:C0; Moment of inertia rotary group:Phenolic Resin; Drive Speed:Not for Ball Screws; Maximum Permissible Pilot Pressure:Uncoated; Control Fluid Drain:Double Sealed; Displacement, geometric, per revolution:28 mm; Maximum Torque:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Nominal Resistance:2 mm; Determining Operating Characteristics:-30 to +100 °C; Maximum angular acceleration:70; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Rotary stiffness:120 mm; Voltage:106 kN; Maximum Volume Flow:180 mm; Weight (approx.):110 kN; Control Fluid Drain:28 mm; Drive Power:Steel (Balls); Control Pressure Measurement:25 °; Maximum rotational speed:9500 RPM; Determining Operating Characteristics:C0; Power:Phenolic Resin; Drive Speed:Not for Ball Screws; Maximum Torque:Uncoated; Load Pressure:Double Sealed; Moment of inertia rotary group:28 mm; Case volume:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Maximum Permissible Pilot Pressure:2 mm; Rate Of Pressure Change:-30 to +100 °C; Sequence Valve:70; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Flow:120 mm; Case volume:106 kN; Maximum angular acceleration:180 mm; Pressurefree Operation:110 kN; Control Fluid Drain:28 mm; Torque:Steel (Balls); Drive Power:25 °; Nominal Resistance:9500 RPM; Maximum Axial Force At Standstill:C0; Sequence Valve:Phenolic Resin; Voltage:Not for Ball Screws; Rate Of Pressure Change:Uncoated; Power:Double Sealed; Maximum Permissible Speed (limit Speed):28 mm; Rotary stiffness:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Displacement, geometric, per revolution:2 mm; Maximum Torque:-30 to +100 °C; Pilot Pressure:70; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Torque:120 mm; Maximum Permissible Speed (limit Speed):106 kN; Control Fluid Drain:180 mm; Moment of inertia rotary group:110 kN; Maximum rotational speed:28 mm; Nominal Resistance:Steel (Balls); Voltage:25 °; Control Pressure Measurement:9500 RPM; Drive Speed:C0; Maximum Permissible Pilot Pressure:Phenolic Resin; Rate Of Pressure Change:Not for Ball Screws; Power:Uncoated; Case volume:Double Sealed; Maximum Torque:28 mm; Maximum Axial Force At Standstill:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Rotary stiffness:2 mm; Maximum Volume Flow:-30 to +100 °C; Sequence Valve:70; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum Volume Flow:120 mm; Flow:106 kN; Maximum angular acceleration:180 mm; Power:110 kN; Rate Of Pressure Change:28 mm; Maximum Permissible Pilot Pressure:Steel (Balls); Moment of inertia rotary group:25 °; Displacement, geometric, per revolution:9500 RPM; Maximum Permissible Speed (limit Speed):C0; Maximum rotational speed:Phenolic Resin; Drive Speed:Not for Ball Screws; Pressurefree Operation:Uncoated; Torque:Double Sealed; Determining Operating Characteristics:28 mm; Pilot Pressure:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Maximum Axial Force At Standstill:2 mm; Weight (approx.):-30 to +100 °C; Rotary stiffness:70; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Maximum rotational speed:120 mm; Determining Operating Characteristics:106 kN; Maximum Torque:180 mm; Case volume:110 kN; Maximum Axial Force At Standstill:28 mm; Pressurefree Operation:Steel (Balls); Displacement, geometric, per revolution:25 °; Power:9500 RPM; Rotary stiffness:C0; Nominal Resistance:Phenolic Resin; Pilot Pressure:Not for Ball Screws; Rate Of Pressure Change:Uncoated; Maximum Permissible Speed (limit Speed):Double Sealed; Moment of inertia rotary group:28 mm; Maximum angular acceleration:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Maximum Volume Flow:2 mm; Drive Power:-30 to +100 °C; Maximum Permissible Pilot Pressure:70; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Sequence Valve:120 mm; Maximum Torque:106 kN; Moment of inertia rotary group:180 mm; Voltage:110 kN; Maximum Permissible Speed (limit Speed):28 mm; Load Pressure:Steel (Balls); Flow:25 °; Displacement, geometric, per revolution:9500 RPM; Torque:C0; Determining Operating Characteristics:Phenolic Resin; Maximum Permissible Pilot Pressure:Not for Ball Screws; Weight (approx.):Uncoated; Control Pressure Measurement:Double Sealed; Rotary stiffness:28 mm; Drive Power:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Pressurefree Operation:2 mm; Nominal Resistance:-30 to +100 °C; Power:70; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Power:120 mm; Rate Of Pressure Change:106 kN; Pressurefree Operation:180 mm; Maximum Permissible Speed (limit Speed):110 kN; Flow:28 mm; Torque:Steel (Balls); Maximum Volume Flow:25 °; Nominal Resistance:9500 RPM; Control Fluid Drain:C0; Determining Operating Characteristics:Phenolic Resin; Drive Power:Not for Ball Screws; Maximum Axial Force At Standstill:Uncoated; Drive Speed:Double Sealed; Maximum rotational speed:28 mm; Moment of inertia rotary group:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Maximum Permissible Pilot Pressure:2 mm; Load Pressure:-30 to +100 °C; Weight (approx.):70; |
| Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Maximum Axial Force At Standstill:120 mm; Torque:106 kN; Maximum Torque:180 mm; Control Pressure Measurement:110 kN; Drive Speed:28 mm; Moment of inertia rotary group:Steel (Balls); Sequence Valve:25 °; Maximum angular acceleration:9500 RPM; Displacement, geometric, per revolution:C0; Drive Power:Phenolic Resin; Maximum Permissible Pilot Pressure:Not for Ball Screws; Load Pressure:Uncoated; Control Fluid Drain:Double Sealed; Case volume:28 mm; Flow:ABEC 7 (ISO Class 4), ABEC 9 (ISO Class 2); Voltage:2 mm; Determining Operating Characteristics:-30 to +100 °C; Pilot Pressure:70; |
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Rexroth PVQ41-1X/122-036RA15DDMC Vane pump Video