Rexroth PVV2-1X/068RA15UMB Vane pump##Parts Table 1## | ||||||||
---|---|---|---|---|---|---|---|---|
Spacer | 1.42 kg | 32 mm | 35 mm | 2 x 3/4 | ||||
Set Plate | 8.508 | 1.654 Inch | 42 Millimeter | 5.512 Inch | 140 Millimeter | N/A | ||||
Valve Plates | 2.951 | Round | 3.0000 in | N/A | ||||
Valve Plate | - | Contact Seal | This product line was formerly known as “Revolvo” | N/A | ||||
Oil Distribution Plate | - | 0.33 | 25 mm | N/A | ||||
Barrel Washer | Medium Duty | 4.3750 in | 1.1875 in | 3.0000 in | ||||
Shafts | 343 mm | 2700 kN | 16 mm | 229 mm | ||||
Swash Plate Assemblies | 43 mm | High Capacity | 1 Rib Inner Ring | 2 Rib Outer Ring | Cage on Outer Ring ID | M14 | N/A | ||||
Cylinder | 47.6 mm | 128 mm | 200 mm | 1.1875 in | ||||
Plunger Sliding Boots | 43 mm | 16.7 mm | PA207- | 320 mm | ||||
Seal Kits | 16 mm | 0.016 | Four-Bolt Flange | 4.3750 in |
Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Flow:3-1/4 in; Pilot Pressure:299 kN; Sequence Valve:6 in; Pressurefree Operation:13.6 kN; Determining Operating Characteristics:7 in; Torque:2790 RPM; Maximum Permissible Speed (limit Speed):5.3543 in; Maximum Volume Flow:38.9 mm; Load Pressure:2.7835 in; Maximum angular acceleration:10 mm; Drive Speed:Split Roller Bearing Cartridge Assembly; Rate Of Pressure Change:01; Maximum Axial Force At Standstill:Non-Expansion Bearing (Fixed); Rotary stiffness:01B304GR; Control Fluid Drain:-70 to +100 °C; Power:01EBCP304GR; Maximum Permissible Pilot Pressure:234 kN; Maximum rotational speed:Steel; |
Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Displacement, geometric, per revolution:3-1/4 in; Case volume:299 kN; Maximum Torque:6 in; Drive Power:13.6 kN; Rate Of Pressure Change:7 in; Voltage:2790 RPM; Control Pressure Measurement:5.3543 in; Pressurefree Operation:38.9 mm; Torque:2.7835 in; Moment of inertia rotary group:10 mm; Determining Operating Characteristics:Split Roller Bearing Cartridge Assembly; Maximum Permissible Pilot Pressure:01; Load Pressure:Non-Expansion Bearing (Fixed); Maximum Permissible Speed (limit Speed):01B304GR; Flow:-70 to +100 °C; Control Fluid Drain:01EBCP304GR; Nominal Resistance:234 kN; Maximum Axial Force At Standstill:Steel; |
Rexroth R901085398 PVV52-1X/154-068RB15DDMC Vane pump | Flow:3-1/4 in; Weight (approx.):299 kN; Maximum Torque:6 in; Maximum rotational speed:13.6 kN; Displacement, geometric, per revolution:7 in; Moment of inertia rotary group:2790 RPM; Drive Power:5.3543 in; Determining Operating Characteristics:38.9 mm; Rotary stiffness:2.7835 in; Nominal Resistance:10 mm; Maximum Axial Force At Standstill:Split Roller Bearing Cartridge Assembly; Pilot Pressure:01; Power:Non-Expansion Bearing (Fixed); Control Fluid Drain:01B304GR; Rate Of Pressure Change:-70 to +100 °C; Drive Speed:01EBCP304GR; Maximum angular acceleration:234 kN; Load Pressure:Steel; |
Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Maximum rotational speed:3-1/4 in; Maximum Torque:299 kN; Control Pressure Measurement:6 in; Rate Of Pressure Change:13.6 kN; Flow:7 in; Maximum Permissible Speed (limit Speed):2790 RPM; Displacement, geometric, per revolution:5.3543 in; Nominal Resistance:38.9 mm; Voltage:2.7835 in; Load Pressure:10 mm; Maximum Axial Force At Standstill:Split Roller Bearing Cartridge Assembly; Torque:01; Moment of inertia rotary group:Non-Expansion Bearing (Fixed); Maximum Permissible Pilot Pressure:01B304GR; Control Fluid Drain:-70 to +100 °C; Weight (approx.):01EBCP304GR; Power:234 kN; Maximum angular acceleration:Steel; |
Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Power:3-1/4 in; Maximum Volume Flow:299 kN; Pilot Pressure:6 in; Maximum Permissible Pilot Pressure:13.6 kN; Maximum Torque:7 in; Moment of inertia rotary group:2790 RPM; Sequence Valve:5.3543 in; Determining Operating Characteristics:38.9 mm; Weight (approx.):2.7835 in; Rotary stiffness:10 mm; Control Fluid Drain:Split Roller Bearing Cartridge Assembly; Pressurefree Operation:01; Nominal Resistance:Non-Expansion Bearing (Fixed); Maximum angular acceleration:01B304GR; Drive Speed:-70 to +100 °C; Drive Power:01EBCP304GR; Flow:234 kN; Rate Of Pressure Change:Steel; |
Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Nominal Resistance:3-1/4 in; Maximum Axial Force At Standstill:299 kN; Case volume:6 in; Displacement, geometric, per revolution:13.6 kN; Pressurefree Operation:7 in; Rotary stiffness:2790 RPM; Weight (approx.):5.3543 in; Maximum Permissible Pilot Pressure:38.9 mm; Control Fluid Drain:2.7835 in; Control Pressure Measurement:10 mm; Determining Operating Characteristics:Split Roller Bearing Cartridge Assembly; Rate Of Pressure Change:01; Maximum angular acceleration:Non-Expansion Bearing (Fixed); Maximum Permissible Speed (limit Speed):01B304GR; Power:-70 to +100 °C; Drive Power:01EBCP304GR; Maximum Torque:234 kN; Drive Speed:Steel; |
Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Maximum Axial Force At Standstill:3-1/4 in; Control Fluid Drain:299 kN; Control Pressure Measurement:6 in; Maximum angular acceleration:13.6 kN; Torque:7 in; Nominal Resistance:2790 RPM; Flow:5.3543 in; Maximum Torque:38.9 mm; Maximum Permissible Pilot Pressure:2.7835 in; Displacement, geometric, per revolution:10 mm; Sequence Valve:Split Roller Bearing Cartridge Assembly; Rotary stiffness:01; Load Pressure:Non-Expansion Bearing (Fixed); Maximum Permissible Speed (limit Speed):01B304GR; Drive Power:-70 to +100 °C; Drive Speed:01EBCP304GR; Maximum Volume Flow:234 kN; Determining Operating Characteristics:Steel; |
Rexroth R901085400 PVV52-1X/162-055RB15DDMC Vane pump | Flow:3-1/4 in; Rate Of Pressure Change:299 kN; Case volume:6 in; Pressurefree Operation:13.6 kN; Weight (approx.):7 in; Rotary stiffness:2790 RPM; Control Fluid Drain:5.3543 in; Determining Operating Characteristics:38.9 mm; Maximum rotational speed:2.7835 in; Maximum Volume Flow:10 mm; Control Pressure Measurement:Split Roller Bearing Cartridge Assembly; Torque:01; Sequence Valve:Non-Expansion Bearing (Fixed); Maximum Permissible Pilot Pressure:01B304GR; Maximum Torque:-70 to +100 °C; Maximum Permissible Speed (limit Speed):01EBCP304GR; Power:234 kN; Moment of inertia rotary group:Steel; |
Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Maximum Volume Flow:3-1/4 in; Load Pressure:299 kN; Maximum Torque:6 in; Case volume:13.6 kN; Torque:7 in; Determining Operating Characteristics:2790 RPM; Drive Speed:5.3543 in; Pilot Pressure:38.9 mm; Control Pressure Measurement:2.7835 in; Sequence Valve:10 mm; Rate Of Pressure Change:Split Roller Bearing Cartridge Assembly; Moment of inertia rotary group:01; Maximum rotational speed:Non-Expansion Bearing (Fixed); Drive Power:01B304GR; Displacement, geometric, per revolution:-70 to +100 °C; Flow:01EBCP304GR; Maximum Permissible Pilot Pressure:234 kN; Rotary stiffness:Steel; |
Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Torque:3-1/4 in; Maximum rotational speed:299 kN; Control Pressure Measurement:6 in; Moment of inertia rotary group:13.6 kN; Power:7 in; Maximum Permissible Pilot Pressure:2790 RPM; Pilot Pressure:5.3543 in; Maximum Volume Flow:38.9 mm; Rotary stiffness:2.7835 in; Control Fluid Drain:10 mm; Nominal Resistance:Split Roller Bearing Cartridge Assembly; Drive Power:01; Maximum Torque:Non-Expansion Bearing (Fixed); Flow:01B304GR; Voltage:-70 to +100 °C; Maximum Axial Force At Standstill:01EBCP304GR; Sequence Valve:234 kN; Load Pressure:Steel; |
Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Moment of inertia rotary group:3-1/4 in; Torque:299 kN; Load Pressure:6 in; Nominal Resistance:13.6 kN; Maximum Permissible Pilot Pressure:7 in; Weight (approx.):2790 RPM; Maximum rotational speed:5.3543 in; Flow:38.9 mm; Drive Speed:2.7835 in; Maximum Torque:10 mm; Maximum Permissible Speed (limit Speed):Split Roller Bearing Cartridge Assembly; Power:01; Displacement, geometric, per revolution:Non-Expansion Bearing (Fixed); Rate Of Pressure Change:01B304GR; Drive Power:-70 to +100 °C; Maximum Volume Flow:01EBCP304GR; Control Fluid Drain:234 kN; Control Pressure Measurement:Steel; |
Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Torque:3-1/4 in; Determining Operating Characteristics:299 kN; Drive Speed:6 in; Nominal Resistance:13.6 kN; Load Pressure:7 in; Maximum Axial Force At Standstill:2790 RPM; Power:5.3543 in; Control Fluid Drain:38.9 mm; Voltage:2.7835 in; Pressurefree Operation:10 mm; Pilot Pressure:Split Roller Bearing Cartridge Assembly; Drive Power:01; Rotary stiffness:Non-Expansion Bearing (Fixed); Sequence Valve:01B304GR; Rate Of Pressure Change:-70 to +100 °C; Displacement, geometric, per revolution:01EBCP304GR; Maximum Torque:234 kN; Flow:Steel; |
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Easy to service due to exchangable pump cartridges; Within one frame size, the stroke volume can be changed by changing the installation kit; The pump can be
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVH are vane pumps with constant displacement. By simply removing the cover, the pump insert can be removed without the need of
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
PV7 - Variable vane pumps, direct operated | Bosch Rexroth
PV7 direct operated pumps are a pressure compensated design that improves system performance and efficiency vs. fixed displacement pumps. PV7 pumps
Rexroth PVV2-1X/068RA15UMB Vane pump Video